Plasson Poly Fittings

Plasson Rural or Metric Poly Fitting - 90 Degree / Right Angle Elbow is used to connect poly pipe at each end. Pressure rated to 1,600 kPa with water at 20 degrees C and this fitting complies with AS4129 and has the Standards Mark Approval for use with drinking water.

Plasson Rural or Metric Poly Fitting -  Joiner with Female BSP Thread is used to connect poly pipe to a Male BSP Threaded Fitting. This fitting is pressure rated to 1,600 kPa with water at 20 degrees C and this fitting complies with AS4129 and has the Standards Mark Approval for use with drinking water.  

All female threaded ends of 1 ¼” (32mm) and larger are fitted with a stainless steel reinforcing ring.

Plasson Rural or Metric Poly Fitting - 90 Degree / Right Angle Elbow with Female BSP Thread is used to connect Rural or Metric poly pipe to a Male BSP Threaded fitting of the required size. Pressure rated to 1,600 kPa with water at 20 degrees C and this fitting complies with AS4129 and has the Standards Mark Approval for use with drinking water.

Female BSP threaded outlet ends of 1¼” (32mm) and larger are fitted with a stainless steel reinforcing ring

Plasson Rural or Metric Poly Fitting - 90 Degree / Right Angle Tee with Female BSP Thread is used to connect poly pipe to a Male BSP Threaded Fitting of the required size. Pressure rated to 1,600 kPa with water at 20 degrees C and this fitting complies with AS4129 and has the Standards Mark Approval for use with drinking water.

Female BSP threaded outlet ends of 1¼” (32mm) and larger are fitted with a stainless steel reinforcing ring.

Plasson Rural or Metric Poly Fitting - Joiner is used to join 2 ends of poly pipe. Manufactured from polypropylene and suitable for drinking water and many other applications, these fittings will never let you down when installed correctly.

Plasson Rural or Metric Poly Fitting - Joiner with Male BSP Thread is used to connect poly pipe to a Female BSP Threaded Fitting. This fitting is pressure rated to 1,600 kPa with water at 20 degrees C and this fitting complies with AS4129 and has the Standards Mark Approval for use with drinking water.

Plasson Rural or Metric Poly Fitting - 90 Degree / Right Angle Elbow with Male BSP Thread is used to connect Rural or Metric poly pipe to a Female BSP Threaded fitting of the required size. Pressure rated to 1,600 kPa with water at 20 degrees C and this fitting complies with AS4129 and has the Standards Mark Approval for use with drinking water.

Plasson Rural or Metric Poly Poly Fitting - 90 Degree / Right Angle Tee with Male BSP Thread is used to connect poly pipe to a Female BSP Threaded Fitting of the required size. Pressure rated to 1,600 kPa with water at 20 degrees C and this fitting complies with AS4129 and has the Standards Mark Approval for use with drinking water.  

Plasson Rural or Metric Poly Poly Fitting -  90 Degree / Right Angle Tee is used to connect  poly pipe at each end. Pressure rated to 1,600 kPa with water at 20 degrees C and this fitting complies with AS4129 and has the Standards Mark Approval for use with drinking water.

Plasson Rural or Metric Poly Fitting - Tapping Saddle is a 2 piece "saddle" that is easily installed on new or existing pipe.   When installed and the hole drilled into the pipe, a saddle provides an outlet from the pipe through the Female BSP Thread.   It is a good idea to drill a hole slightly smaller then the female BSP thread size using a "Spade" drill bit.   The spade bit has a very sharp point which will not slip when you're drilling.  

Rural saddles are rated to 630 kPa the same as the pipe.